GE 1000NG&SA1000NGS-T12-M-EN (Steam)
1000NGS/1000NG
Set ea jenereithara ea khase ea tlhaho
Tlhophiso ea mantlha le likarolo:
• Enjene ea khase e sebetsang hantle haholo.
• Alternator ea AC synchronous.
• Terene ea tšireletso ea khase le sesebelisoa sa tšireletso ea khase khahlanong le ho lutla.
• Sistimi ea ho pholisa e loketse mocheso oa tikoloho ho fihla ho 50℃.
• Teko e thata ea lebenkele bakeng sa mefuta eohle.
• Silencer ea indasteri e nang le bokhoni ba ho khutsisa ba 12-20dB(A).
• Sistimi e tsoetseng pele ea taolo ea enjene: Sistimi ea taolo ea ECI e kenyelletsa: sistimi ea ho tima, sistimi ea taolo ea ho phatloha, sistimi ea taolo ea lebelo, sistimi ea ts'ireletso, sistimi ea taolo ea moea / mafura le mocheso oa silindara.
• Ka Sistimi ea Taolo e pholileng le ea Mocheso ho etsa bonnete ba hore yuniti e ka sebetsa ka mokhoa o tloaelehileng mochesong oa tikoloho ea 50℃.
• Khabinete e ikemetseng ea taolo ea motlakase bakeng sa taolo e hole.
• Tsamaiso e mengata ea taolo e nang le ts'ebetso e bonolo.
• likhokahano tsa puisano tsa data tse kentsoeng tsamaisong ea taolo.
• Ho beha leihlo matla a betri le ho tjhaja ka bohona.
• Sebelisa boiler ea mouoane e bolokehileng le e sebetsang hantle eo katleho ea eona e fihlang ho 92% le bophelo ba ts'ebeletso ho fihlela lilemo tse 20.
| Lintlha tsa mofuta oa yuniti | |||||||||||
| Mofuta oa mafura | Khase ea tlhaho | ||||||||||
| Mofuta oa lisebelisoa | 1000NGS/1000NG | ||||||||||
| Kopano | Phepelo ea motlakase + Sistimi ea phapanyetsano ea mocheso + Boiler ea mouoane oa ho khutlisa mosi | ||||||||||
| Tlhahiso e tsoelang pele | |||||||||||
| Mofuta oa mafura | Khase ea tlhaho | ||||||||||
| ho feto-fetoha ha matla | 50% | 75% | 100% | ||||||||
| Tlhahiso ea motlakase | kW | 600 440 295 224 1505 | 900 635 455 350 2215 | 1000 840 645 479 2860 | |||||||
| Mocheso o phodileng[1] | kW | ||||||||||
| Mocheso oa khase (ho 120 ℃) | kW | ||||||||||
| Mocheso oa mocheso oa boiler oa mouoane (max.)[2] | kW | ||||||||||
| Ho kenya matla | kW | ||||||||||
[1] Ha re re mocheso o khutlang oa metsi ho tsoa ho Mosebelisi ke 60 ℃.
[2] Lintlha li baloa tlas'a boemo ba ho se be le mouoane o potolohang, 'me mocheso oa mocheso oa boiler ke 210 ° C. Lintlha li susumetsoa ke mokhoa oa ho kenya, mokhoa oa kopo le tikoloho.
Polelo e khethehileng:
1, Lintlha tsa tekheniki li thehiloe ho khase ea tlhaho e nang le boleng ba khalori ea 10 kWh/Nm³ le nour ea methane.90%
2, Lintlha tsa tekheniki tse bontšitsoeng li ipapisitse le maemo a tloaelehileng ho latela ISO8528/1, ISO3046/1 le BS5514/1
Litokiso tse lekantsoeng li etsoa tlas'a boemo bo lumellanang le DIN ISO 3046/1.Boemong bo lekantsoeng ba tlhahiso, mamello ea tšebeliso ea khase ke 5%, 'me mamello ea tlhahiso ea mouoane ke ± 8%.
| Sebetsa ka mokhoa o tšoanang oa mains | |||||||||||
| Matla a motlakase | % | 33.4 29.2 14.8 77.4 | 34.5 28.6 15.8 78.9 | 35.1 29.3 16.7 81.1 | |||||||
| Mocheso o phodileng (boholo.) | % | ||||||||||
| Boleng bo sebetsang hantle ba mouoane (max.)[2] | % | ||||||||||
| Kakaretso e sebetsang hantle | % | ||||||||||
| Boiler ba mouoane | |||||||||||
| Mocheso oa ho kena | Metsi kapa Mouoane | ℃ |
| 143 | |||||||
| Khatello ea ho kena | Khatello e felletseng | Mpa | 0.4 | ||||||||
| Mocheso o sebetsang | Mouoane | ℃ | 151 | ||||||||
| Khatello ea ho sebetsa | Khatello e felletseng | Mpa | 0.51 | ||||||||
| Mouoane o lekantsoeng (Inlet medium steam) | Standard / Max. | kg/h | 53999~115510[2] | ||||||||
| Mouoane o lekantsoeng (Metsi a kenang bohareng) | Standard / Max. | kg/h | 373-1798[3] | ||||||||
| Ho sebetsa hantle ha mocheso | % | 16.7 | |||||||||
| Mocheso oa ho kenya mosi | Max. | ℃ | 520 | ||||||||
| Mocheso oa ho ntša mosi | Min. | ℃ | 210 | ||||||||
| Phapang e tloaelehileng ea mocheso oa mocheso oa mosi | kgutlisetsa/pele | K | 310 | ||||||||
| Mokhoa oa ho sebetsa | maemo |
| Metsi / Mouoane | ||||||||
| Bongata ba ho tlatsa ho pholisa | Metsi / Max | L | 1000 | ||||||||
| Min.bongata ba potoloho ea sepholi sa boiler | Metsi | kg/h | 100 | ||||||||
| Khatello e phahameng ka ho fetisisa | Mpa | 1.25 | |||||||||
| Mocheso o phahameng ka ho fetisisa | ℃ | 250 | |||||||||
[2] Lintlha ke mouoane o moholo o entsoeng ka ho tsosolosa khase ea mouoane e setseng tlas'a boemo ba mouoane o potolohang.
[3] Lintlha li baloa tlas'a boemo ba ho se be le mouoane o potolohang, 'me mocheso oa tlatsetso ea metsi bakeng sa boiler ke 20 ° C.
Polelo e khethehileng:
1, Lintlha tsa tekheniki li lekantsoe ka maemo a tloaelehileng: Khatello e felletseng ea sepakapaka: 100kPa
Mocheso oa tikoloho: 25°C Mongobo o amanang le moea: 30%
2, Ho ikamahanya le maemo maemong a ambient ho latela DIN ISO 3046 / 1. Mamello bakeng sa tšebeliso e khethehileng ea mafura ke + 5% ka tlhahiso e lekantsoeng.
3, Boiler bo etselitsoe, bo hlahisoa le ho lekoa ho latela GB/T150.1-2011~GB/T150.4-2011“Sekepe sa Khatello”le GB/T151-2014"Heat Exchanger".
Boima le boima bo kaholimo ke tsa sehlahisoa se tloaelehileng feela 'me li ka fetoha.Kaha tokomane ena e sebelisoa feela bakeng sa litšupiso tse rekisoang esale pele, nka lintlha tse fanoeng ke Smart Action pele o laela hore e be ea ho qetela.
| KhaseLintlha | |||
| Mafura | [3] Khase ea tlhaho | ||
| Khatello ea ho kenya khase | 3.5Kpa~50Kpa & ≥4.5bar | ||
| Bophahamo ba molumo oa methane | ≥ 80% | ||
| Theko e tlase ea mocheso (LHV) | Hu ≥ 31.4MJ/Nm3 | ||
| Tšebeliso ea khase ka hora ho 50% mojaroka 75% mojaro ho 100% mojaro | 155 m3 225 m3 300 m3 | ||
| [3] Lintlha tse amehang tsa bukana ea tekheniki li tla nchafatsoa kamora hore likarolo tsa khase ea tlhaho li fanoe ke Mosebelisi.Polelo e khethehileng:1, Lintlha tsa tekheniki li thehiloe ho khase ea tlhaho e nang le boleng ba khalori ea 10 kWh/Nm³ le nour ea methane.90%2, Lintlha tsa tekheniki tse bontšitsoeng li ipapisitse le maemo a tloaelehileng ho latela ISO8528/1, ISO3046/1 le BS5514/13, Lintlha tsa tekheniki li lekantsoe ka maemo a tloaelehileng: Khatello e felletseng ea sepakapaka: 100kPaMocheso oa tikoloho: 25°C Mongobo o amanang le moea: 30%4, ho ikamahanya le maemo maemong a ambient ho latela DIN ISO 3046/1. Mamello bakeng sa tšebeliso e khethehileng ea mafura ke + 5% ka tlhahiso e lekantsoeng. | |||
| Lintlha tsa tlhahiso[3] | |||
| Sekhahla sa ho phalla ha metsi, se mongobo[4] | 5190 kg/h | ||
| Sekhahla sa phallo ea mouoane, se omme | 4152 Nm3/h | ||
| Mocheso oa ho felloa ke matla | 220 ℃ ~ 210 ℃ | ||
| Khatello e phahameng e lumelletsoeng ea ho tsoa ka morao | 4.0Kpa | ||
| Genset e lumellana le Emission e tloaelehileng: | ISO3046, ISO8528,GB2820, CE,CSA,UL,CUL | ||
| Standard | SCR (Khetho) | ||
| NOx, ho 5% e setseng ea oksijene & 100% mojaro | Ka tlase ho 500 mg/Nm³ | Ka tlase ho 250 mg/Nm³ | |
| CO, ho 5% e setseng ea oksijene le mojaro oa 100%. | ≤ 600 mg/Nm3 | ≤ 300 mg/Nm3 | |
| Lerata la tikoloho | |||
| Boemo ba khatello ea molumo bo hole ho fihla ho 7 m(ho ipapisitsoe le tikoloho) | SA1000NG/89dB (A) & SA1000NGS/75dB (A) | ||
[3] Litekanyetso tsa ho tsoa ho tlase ho li-catalytic converter tse ipapisitseng le mosi o omileng.
Maemo a tloaelehileng TA-LUFT: Mocheso oa moea: 0 °C, khatello ea sepakapaka e felletseng: 100 kPa.
| Mokhoa o ka sehloohong oa ts'ebetso ea matla a ho sebetsa | ||||||
| Alternator e lumellanang | Naleli, 3P4h | |||||
| Khafetsa | Hz | 50 | ||||
| Boemo (F) KVA matla a mantlha | KVA | 1500 | ||||
| Ntlha ea matla | 0.8 | |||||
| Matla a jenereithara | V | 380 | 400 | 415 | 440 | |
| Hona joale | A | 2279 | 2165 | 2086 | 1968 | |
Alternator compliance withGB755, BS5000, VDE0530, NEMAMG1-22, IED34-1, CSA22.2 le AS1359 standard.
Haeba ho na le liphapang tsa motlakase oa motlakase ka ± 2%, ho tlameha ho sebelisoa mochini o laolang matla a motlakase (AVR).
| Lintlha tsa ts'ebetso ea Genset le theknoloji ea tlhahiso | |||||||||
| Nako ea ho sebetsa ka bongata ho 1.1xSe(hora) | 1 | Mohala oa ho kena-kenana le mohala (TIF) | ≤50 | ||||||
| Ho kheloha ha motlakase o tsitsitseng | ≤±1％ | Telephone harmonious factor (THF) | ≤2%, joalo kaBS4999 | ||||||
| Ho kheloha ha motlakase oa nakoana | -15 ~ ~ 20% | Theknoloji ea tlhahiso
Maemo le setifikeiti
| |||||||
| Nako ea ho khutlisa motlakase (s) | ≤4 | ||||||||
| Ho fetoha ha motlakase | 1% | ||||||||
| Taolo ea maqhubu a boemo bo tsitsitseng | ±0.5% | ||||||||
| Transient -state frequency regulation | ±5% | ||||||||
| Nako ea ho hlaphoheloa khafetsa (s) | ≤3 | ||||||||
| Sehlopha sa maqhubu a tsitsitseng | 0.5% | ||||||||
| Karabo ea nako ea ho hlaphoheloa (s) | 0.5 | ||||||||
| Lintlha tsa tšebetso ea alternator ea AC | Enjene ea khase e sebetsang hantle | ||||||||
| Letšoao la alternator | MECC | Letšoao la enjine | CNHTC | ||||||
| Mofuta oa koloi | ECO38 1L4A | Mohlala oa enjene | STEYR T12 | ||||||
| Matla a hlahisoang a lekantsoeng (kVA) | 250 | Mofuta oa enjene | Li-cylinders tse 6 tse ka hare, turbocharger e nang le intercooler | ||||||
| Alternator e sebetsang hantle | 93.40% | Bore x stroke (mm) | 126 limilimithara × 155 limilimithara | ||||||
| Ntlha ea matla | 0.8 | Ho falla (L) | 11.6 | ||||||
| Khokahano ea lithapo | D/Y | Compression ratio | 11 | ||||||
| Sehlopha sa ho kenya rotor | H级 | Matla a hlahisoang a lekantsoeng | 235kW/1500rpm | ||||||
| Mokhoa oa ho hlasimolla | Brush-tlase | Tšebeliso ea oli ka holimo. | ≤0.3 g/kW.hr | ||||||
| Voltage (V) | 380/400/415/440 | Mokhoa oa ho hotetsa | Silinda e le 'ngoe e laoloang ka motlakase e ikemetseng e nang le matla a phahameng- | ||||||
| Lebelo le lekantsoeng (mets-1） | 1500 | Mokhoa oa ho laola mafura | Ho tuka ha matla, taolo ea loop e koetsoeng | ||||||
| Tšireletso ea matlo | IP23 | Mokhoa oa ho laola lebelo | 'Musisi oa elektronike | ||||||
| Tshebeletso | |||||||||
| Boemo ba oli (mocheso oa tikoloho o phahame ho feta ho tloswa 5°C/ mocheso o tikolohong o ka tlase ho feta 5°C) | API 15W-40 CF4API 10W-30 CF4 |  | |||||||
| Matla a oli e tlotsang (min./max.) | 35 L / 37 L | ||||||||
| E kentse tanka e ncha ea oli | N/A | ||||||||
| Bokhoni ba ho pholisa | 5 L (Min. motsoako o pholisang potoloho ea metsi bongata LT) 40 L (Bongata ba potoloho ea sepholi sa enjene e Min.) | ||||||||
| Mofuta o pholileng | 50% ea metsi a nolofalitsoeng le tharollo ea 50% e thibelang leqhoa (ethylene glycol, e nang le motsoako o thibelang leqhoa pakeng tsa 35% -68%) | ||||||||
| Phepelo ea mocheso oa moea | 10 ℃ ~ 45 ℃ | ||||||||
| moea oa kamore ea ho kenya (phallo ea molumo oa moea o kenang) | ＞15000 m³/h | ||||||||
| Sekhahla sa Phepelo | ||||
| Enjene | Alternator Canopy le motheo Khabinete ea motlakase | |||
| Enjene ea khaseSistimi ea ho hotetsaLambda molaoliElectronic 'musisi actuatorMotlakase o qalang motlakaseSistimi ea betri | AC alternatorH class insulationTšireletso ea IP55AVR voltage regulatortaolo ea PF | Setšoantšo sa motheo sa tšepe sheelBracket ea enjineLi-isolators tsa vibrationCanopy e thibelang molumo (boikhethelo)Ho hloekisa lerole (ho ikhethela) | Seqhoa sa potoloho ea moea7-inch touch screenLikhokahano tsa puisano Khabinete ea phetoho ea motlakaseSistimi ea ho tjhaja ka boits'oaro | |
| Sistimi ea phepelo ea khase | Sistimi ea ho tlotsa | Matla a tloaelehileng | Sistimi ea ho kenya / exhaust | |
| Terene ea tšireletso ea khaseTšireletso ea ho lutla ha khaseMotsoako oa moea / mafura | Sesefa sa oliTanka e thusang ea letsatsi le letsatsi ea oli (ho ikhethela)Sistimi ea ho tlatsa oli ka boits'oaro | 380/220V400/230V415/240V | Sefepi sa moeaSilencer e qetang matlaExhaust molumo | |
| Terene ea Khase | Tšebeletso le litokomane | |||
| Valve e khaotsoeng ka letsoho2 ~ 7kPa tekanyo ea khatelloSesefa sa khaseSafety Solenoid valve (mofuta o thibelang ho phatloha ke khetho) ho laola khatelloFlame arrestor e le khetho | Sephutheloana sa lisebelisoa Ts'ebetso ea enjineBuka ea ho kenya le ho sebetsa Litlhaloso tsa boleng ba khaseBukana ea tlhokomelo Bukana ea tsamaiso ea tsamaisoSoftware manual After service guideLikarolo bukana Pakete e tloaelehileng | |||
| Phetoho ea boikhethelo | ||||
| Enjene | Alternator | Sistimi ea ho tlotsa |
| Sefefo sa moea se mahoasheValve ea ho laola tšireletso ea molloSefuthumatsi sa metsi | Lebitso la jenereithara: Stamford, Leroy-Somer,MECCPhekolo khahlanong le mongobo le kutu | Tanka e ncha ea oli e nang le matla a maholoTekanyo ea tšebeliso ea oliPompo ea mafuraMofuthu oa oli |
| Sistimi ea motlakase | Sistimi ea phepelo ea khase | Palo ea li-volts |
| Remote monitoring Grid-connection remote control sensor | Tekanyo ea phallo ea khaseHo hloekisa khaseSistimi ea alamo e fokotsang khatello ea khase pele ho kalafo | 220V230V240V |
| Tšebeletso le litokomane | Sistimi ea ho felloa ke matla | Sistimi ea phapanyetsano ea mocheso |
| Lisebelisoa tsa tšebeletsoLikarolo tsa tlhokomelo le litšebeletso | Mekhoa e meraro ea catalytic converterLebela thebe ho tloha ho thetsanaSetholisa sa boluloPhekolo ea khase ea mouoane | Radiator ea tšohanyetsoMofuthu oa motlakaseSistimi ea ho khutlisa mochesoTanka ea polokelo ea mocheso |
Sistimi ea taolo ea SAC-200
Sistimi e hlophisehileng ea taolo e amoheloa ka ponts'o ea skrineng sa touch , le mesebetsi e fapaneng, ho kenyelletsa: ts'ireletso le taolo ea enjene, ho ts'oana lipakeng tsa li-genset kapa li-genset le grid, hammoho le mesebetsi ea puisano.etc.
Melemo e ka sehloohong
→ Selaoli sa Premium gen-set bakeng sa liphatsa tsa lefutso tse le 'ngoe le tse ngata tse sebetsang maemong a standby kapa a bapileng.
→ Ts'ehetso ea likopo tse rarahaneng tsa tlhahiso ea matla litsing tsa data, lipetlele, libanka le lits'ebetso tsa CHP.
→ Ts'ehetso ea lienjine ka bobeli tse nang le yuniti ea elektroniki - ECU le lienjine tsa mochini.
→ Taolo e felletseng ea enjene, alternator le thekenoloji e laoloang ho tsoa yuniti e le 'ngoe e fana ka phihlello ea data eohle e lekantsoeng ka tsela e lumellanang le e tsamaellanang le nako.
→ Mefuta e mengata e fapaneng ea likhokahano tsa puisano e lumella ho hokahana ha bonolo litsamaisong tsa ho beha leihlo (BMS, jj.)
→ Sefetoleli sa PLC se hahelletsoeng ka hare se u lumella ho hlophisa mohopolo o ikhethileng ho fihlela litlhoko tse batloang ke bareki u le mong ntle le tsebo e eketsehileng ea lenaneo le ka tsela e potlakileng.
→ Taolo e bonolo le ts'ebeletso
| Mesebetsi e ka sehloohong | |||||
Nako ea ho sebetsa ha enjeneMosebetsi oa Tšireletso ea Alamo
Emergency Stop
Enjene monitor: pholileng, lubrication, ho kenya, ho khathala Taolo ea motlakase le matla a motlakase | 12V kapa 24V DC Ho qalaRemote Control Interface e le khethoPhetoho ea ho Qala / Stop Control ka ho iketsaSeta Kenyeletso, Output, Alamo le NakoNumere Control Input, Relays Control OutputHo hloleha ha boemo ba tšohanyetso ho emisa le ho bonts'a maqhubu a motlakase oa betri ea gensetTšireletso ka IP44Ho lemoha ha khase e lutla | ||||
| Tlhophiso e tloaelehileng | |||||
| Taolo ea Enjine: Lambda e koetse taolo ea loopSistimi ea ho hotetsaElectronic 'musisi actuatorHo qala taolo ea lebelo la taolo ea lebelo | Taolo ea jenereithara:Taolo ea matlaTaolo ea RPM (synchronous) Kabo ea meroalo (mokhoa oa sehlekehleke)Taolo ea motlakase | Ho latela motlakase (synchronous)Taolo ea motlakase (mokhoa oa sehlekehleke)Kabo ea matla a sebetsang(mokhoa oa sehlekehleke) | Litaolo tse ling:Ho tlatsa oli ka bohonaTaolo ea Valve ea ho kenyaTaolo ea fan | ||
| Tlhokomelo ea tlhokomeliso esale pele | |||||
| matla a betriLintlha tsa alternator: U, I, Hz, kW, kVA,kVAr,PF,kWh,kVAhGenset frequency | Lebelo la EnjeneNako ea ho sebetsa ha enjeneMocheso oa khatello ea ho kenaKhatello ea oli | Mocheso o phodilengTekanyo ea boemo ba oksijene khase ea mouoaneTlhahlobo ea boemo ba ho khantša | Mocheso o phodilengKhatello ea ho kenya khase ea mafura | ||
| Mesebetsi ea ts'ireletso | |||||
| Tšireletso ea enjeneKhatello e tlaase ea oliTšireletso ea lebeloHo feta lebelo/lebelo le lekgutshwaneHo hloleha ho qalaLetšoao la lebelo le lahlehile | Tšireletso ea alternator
| Tšireletso ea libese / mains
| Tšireletso ea tsamaisoMosebetsi oa Tšireletso ea AlamoMocheso o phahameng oa pholisoqosa phosoEmergency Stop | ||
Lipente, Litekanyo le Boima ba Genset -1000NGS
| Genset boholo (bolelele * bophara * bophahamo) mm | 12192×2435×5500 (setshelo) |
| Genset dry weight (Mofuta o bulehileng) lik'hilograma | 22000 (setshelo |
| Mokhoa oa ho fafatsa | Ho roala phofo ea boleng bo holimo (RAL 9016)) |
Litekanyo ke tsa litšupiso feela.
1000kW Sete ea jenereithara ea khase ea tlhaho— Mofuta o Khutsitseng
